User Manual

Unpacking and Setup

Assembly

LW Scientific packs each Revelation III Microscope with utmost care. Examine

the outer and inner containers for any visual damage. Retain all of the

packing material until you have examined and tested your new microscope.

If there is damage, please contact the shipping company, as our warranty

does not cover shipping damage. If you are uncertain who the shipper is, contact the distributor from whom you

purchased the microscope. Please retain all packaging material for future use. Carefully unpack** your Revelation III

Microscope using the following checklist for all the parts and accessories:

1 - Microscope body with Abbe condenser

2 - 10x eyepieces

1 - Binocular head (Seidentopf style)

1 - Mirror and attachment device for field use

2 - Filters (blue & green)

4 - Objectives 4X, 10X, 40XR, 100XR (oil)

1 - 3-Prong power cord

1 - Immersion oil

1 - Dust cover

1 - Spare Fuse

**Note: Some parts may be packed in the

outer recesses of the Styrofoam blocks

Power

Remove the body of the microscope and place it on a sturdy, dust-free surface. Remove the plastic plugs in the nose

piece. Install the objectives in such a way that when you turn the nosepiece clockwise, you are moving from the 4x,

Insert the 10x eyepieces.

Attach the power adapter.

For protection during shipping your Rev III is shipped with the stage locked in low position. To disengage the lock,

pull the STAGE LOCK LEVER towards the rear and downward. The stage should now move upward freely.

Remove the microscope head from the Styrofoam carton and pull off the protective covers from the

eyepiece tubes and head mount. Insert the head mount into the upper arm of the body. Using the

head retention screw, secure the head in place. Note: Do not over-tighten.

If you suspect faulty electronics, call LW Scientific’s technical service department at 800-726-7345.

Input: Auto-switching 100V-240V AC / 50-60Hz

Bulb: 3w LED

Fuse: T1A

When purchased from LW Scientific or from an authorized distributor, LW Scientific Professional Stereoscopes and Laboratory

Microscopes have a life time warranty against defects in materials and workmanship and one (1) year warranty on

electronic components. All other LW Scientific instruments, including Student Microscopes and Stereoscopes, have a one (1)

year limited warranty. This warranty is not valid on normal wear and tear, cosmetic damages

caused by chemicals, solvents, and/or cleaning solutions, as well as acts of God.

Please register your product online at: www.lwscientific.com/warranty_form.

Important: Warranty information must be completed within 30 days of purchase.