User Manual

ManualsBrandsLW Scientific ManualsCompound MicroscopesRevelation III DIN Plan Trinocular Microscope, 4 Objectives

P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046

Instruction Manual

A Single Diopter Adjustment

B Binocular Head

C Head Retention Screw (side)

D Stage Stop Lever

E Friction Adjustment

F Coarse Focus

G Fine Focus

H X/Y Axis Stage Controls

I Brightness Control

J On Switch

K Base Condenser

L Flip-out Filter Holder

M Substage Iris Diaphragm

N Substage Abbe Condenser

O Stage

P Slide Holder

Q Objectives

R Nose Piece

S Eyepieces

Model pictured:

Revelation III LED

Introduction

The LW Scientific Revelation III microscope is our best-selling medical-grade compound microscope, popular in physician

and veterinary offices as well as universities and medical schools. Its crisp optics, sturdy design and proven track record

make the Revelation III the best choice for superior performance at an economical price. The Revelation 3 microscope is

intended for use as a biological microscope in a professional environment in accordance with the guidelines set forth in

this operations manual.

Not all features available on all models -

see back page for model specifications.

Phase and Dark Field

Four Head Choices

Carry Cases Camera Attachments

Summary of content (4 pages)

PAGE 1
Revelation III LED Instruction Manual Model pictured: Revelation III LED Not all features available on all models see back page for model specifications.
PAGE 2
LW Scientific packs each Revelation III Microscope with utmost care. Examine the outer and inner containers for any visual damage. Retain all of the packing material until you have examined and tested your new microscope. If there is damage, please contact the shipping company, as our warranty does not cover shipping damage. If you are uncertain who the shipper is, contact the distributor from whom you purchased the microscope. Please retain all packaging material for future use.
PAGE 3
Operation 1 Once you have assembled all the parts and allowed your microscope to come to room temperature, plug the power adapter into the microscope and then into the appopriate AC outlet. Note: Excess cold can fog lenses and cause lamp to fail. 2 Turn the light on using the black on/off switch on the right side of the base. Next adhust the light intensity using the brightness control wheel located on the right side just behind the on/off switch.
PAGE 4
Maintenance 1 Always cover your microscope with the dust cover when not in use. 2 When cleaning the lenses, use lens paper or a cotton swab dipped in lens cleaning solution. 3 Excess oil should be cleaned off your 100x objective and stage at once. An alcohol pad is best for removing oil from the stage and on the other metal parts, but is not recommended for use on the lenses. Use lens cleaning solution and lens paper to clean off your objectives.