User Manual

BW/BWS Series Indicator Technical Manual
- 17 -
 Press key to confirm and press to select sigr /dual 1
/dual 2
 Press key to confirm and press to select cal
 Press key to confirm
Calibration Cal
 Press key to enter calibration, display will show kg or lb. press
key to select the calibration unit kilograms or pounds, press
key ,display will be show unld
 Remove all the weight from the platform.
 When indicator get stable, press key to confirm.
 Display will be show the last calibration weight. If want to change the
calibration weight value, press and keys to change the active
digits and press key to increment the value.
 When the calibration value is correct, press key to confirm.
 Display will be show load
 Place the calibration weight on the platform.
 When indicator get stable, press key to confirm.
 Display will com to normal weighing mode
8. RS-232 OUTPUT
8.1. Specifications:
RS-232 output of weighing data
Code : ASCII
Data bits : 8 data bits
Parity :No Parity
Baud rate : 600bps to 9600bps selectable