User Manual

BW/BWS Series Indicator Technical Manual
- 9 -
5.2. Check Weighing
It can set an upper or lower limit when weighing with the limits range.
During the limit controls dividing the unit will indicate whether a value
upper or lower limits with an alarm sound .
5.2.1. Set Limits
 Press and key together, display will be show set h.
 Press key to select set h or set l
 Press key to confirm, display will show 00000 and will blink the last
digit.
 Enter the high limit value by using and keys to change the
active digits and press key to increment the value.
 Press key to confirm, display will show set l
 Enter the high limit value by using and keys to change the
active digits and press key to increment the value.
 Press key to confirm.
 To escape from the settings press key.
5.2.2. Set Check Weighing
 Press and key together, display will be show set h.
 Press key to select display beep.
 Press key to confirm, display will be shown none or ok or ng
 Check mode none : No beep sound in the limits. Function turned off.
 Check mode ok : When the weight is between the limits. OK will shown