User manual

12
in a state of users. On the choice of the value, do not set to the same
value. The same value will lead to frequent switch under the light
intensity changing.
1.6 NR
In the "NR" menu click "OK" button to enter the sub-menu, you
can set the corresponding parameters.
Noise reduction is in the case of very low light reduction caused
by low-light point of the picture noise to enhance the signal to noise
ratio (S / N) and image clarity, and the camera in low light conditions
catches clearly sharpness image, the quality can be guaranteed.
Set the noise reduction mode, 2DNR, 3DNR two options. Choose
noise reduction corresponds to the modes.
When the setup complete, click "OK" button to return to the
implementation for the appropriate functions.
1.7 Special
Click “OK” button to enter the “Special” setting sub-menu.
NR
1. 2DNR LOW/MIDDLE/HIGH/OFF
2. 3DNR LOW/MIDDLE/HIGH/OFF
3. RETURN RET