Full Product Manual
9.3 Press the move buttons - to adjust the stare time and end
time for each cycle.
9.4 Once the start and end time for each cycle is set, wait 10 seconds and the main
interface will be returned. The Pre-Heating Cycle time is now set.
10 Anti-freeze protection
Your Luxury Spas hot tub is equipped with anti-freeze protection. If the water
temperature drops lower than 6℃(43℉) the heating function will automatically turn on.
Once the water temperature reaches 10℃(50℉) the heater function will turn off
automatically.
11 Changing from Celsius to Fahrenheit
11.1 To change from Celsius to Fahrenheit, press and hold the button for 8
seconds within 5 minutes of turning the spa on. This will change the temperature
(℃ or ℉)。
12 Setting the Spa Temperature
12.1 When the system is powered on but not in programming mode, you can press
and to adjust the temperature up or down.
13 Setting the Clock
Setting the clock on the spa ensures that the other spa functions (such as pre-heating and
time water circulation) operate correctly.
Luxury Spa USA
Page 23
Call us at 866-220-7405