Owners Manual Elite Series Congratulations On Your New Spa! Luxury Spa USA Call us at 866-220-7405
Before enjoying your new Luxury Spas hot tub, please follow these important steps 1- Before filling the hot tub, remove the plastic cover from the filter. The filter is located in the sanitary basket. Check to make sure there no other debris are inside the sanitary basket. 2- Make sure your hot tub is hooked to the correct voltage and amperage for your model hot tub. All Luxury Spas hot tubs are 240V. You can find the correct amperage for your model listed in the included User Guide.
Table of Contents Safety Informa�on ................................................................................................ 2 Safety Instruc�ons ............................................................................................... 3 Preparing For your New Spa .................................................................................. 5 Spa Models + Electrical Requirements ................................................................. 6 Electrical Install ........................
Important Safety Instructions and Warnings READ AND FOLLOW ALL INSTRUCTIONSNS ! To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Warning: Children should not use spas or hot tubs without adult supervision. Avertissement: Ne pas laisser les enfants utiliser une cuve de relaxation sans surveillance. ! Warning: Do not use spas or hot tubs unless all suction guards are installed to prevent body and hair entrapment.
Important Safety Instructions and Warnings READ AND FOLLOW ALL INSTRUCTIONS ! To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Warning: Prolonged immersion in a spa or hot tub may be injurious to your health. Avertissement: L’utilisation prolongee d’ une cuve de relaxation peut etre dangereuse pour la sante. ! Warning: Do not permit or use electric appliances (such as a light, telephone, radio or television) within 1.
Preparing for your New Spa Consider Spa Use Permitting Most cities and county's require permits for exterior construction and electrical circuits. In addition, some communities have codes requiring residential barriers such as fencing and/or self-closing gates on property to prevent unsupervised access to the property by children. Your local inspections office can provide information on which permits may be required and how to ob-tain them prior to the delivery of your spa.
Filter Removal Upon receiving your Spa, you'll need to remove the filter and the plastic that covers it. Upon doing so, check the Sanitation basket to assure there is no remaining plastic that could have gotten lodged during shipping. To access the filter, remove top cover(1), and rotate the filter housing (2) to access the filter(4). Photo 5 shows the bottom sanitation basket, please assure this is clear of any debris.
240 Volt Electrical Installation ! Warning: The electrical circuit must be installed by an electrical contractor and approved by a local building or electrical inspector. Failure to comply with state and local codes may result in fire or personal injury and will be the sole responsibility of the spa owner. Improper installations present hazards which can result in personal injury or property damage and void the warranty on the spa.
Luxury Spa's Electrical Components *Note: A GFCI circuit is required. Using the suggested size will ensure proper operation. Call Customer Service for any additional questions 866-220-7405.
Prepare for Your New Spa GFCI Wiring Diagram ! (North America 240V 60hZ) WARNING: The electrical circuit must be installed by an electrical contractor and approved by a local building or electrical inspector. Failure to comply with state and local codes may result in fire or personal injury and will be the sole responsibility of the spa owner. Customer must provide a disconnect in the fixed wiring.
SPA FEATURES 1.) All electronic features of the spa except the Bluetooth are controlled by the control pad. 9) Spa Drain allows you to drain the spa quickly for changing out the water. 2 ) Air adjuster handles let you adjust the amount of pressure at the designated jets by turning the handle left or right. 10) Water intake grates allow water circulation through the motor and heater and out through the jets.
Water Quality and Maintenance Testing and Adjusting Water Chemistry - Before using your spa, it is important to test the water so that it maintains the correct chemical balance. This will ensure water quality, clarity and help keep your spa equipment in good condition. - You will need to test and adjust the chemical balance of your spa water. Although this is not difficult, it needs to be done regularly.
Sanitation Balancing the pH Level - The pH level is the measure of the balance between acidity and alkalinity. - The recommended pH is 7.2 - 7.6. - If the pH is too low, it can cause corrosion of metal fixtures and the heating element. - If the pH is too high, it can cause scaling by allowing metals or minerals to form deposits and stain spa surfaces. Too alkaline, causes scaling Ideal balance Too acidic, causes corrosion. Ozone 8.2 8.0 Decrease the pH level. 7.8 7.6 7.4 7.2 7.0 6.
! The manufacturer does hereby claim no responsibility or liability for use of and quantities of the chemicals used. Read and follow all label instructions. Filtration Cleaning your filter regularly is the easiest and most effective single thing you can do to keep your water clear. A clogged or dirty filter will cause the heater and pump to work harder than they need to, possibly causing them to fail. The spa’s heating system will only function with the proper amount of water flow through the system.
Draining Your Spa Pillow Care and Removal Your spa should be drained every 3-4 months, and refilled with fresh tap water. The following is the recommended method for draining your spa. 1. Turn off the power at the breaker. 2. Remove filter. 3. Your drain valve is located outside corner of the Service Access Side. 4. Rotate the cap and pull until you feel it give, then pull the plug two notches out. 5. Once the drain plug is external, hook up the female end of the garden hose. 6.
! Vacation Care You can leave your spa unattended for up to two weeks if you follow these instructions. - ALWAYS lock your cover using the cover locks if you plan to be away from home and the spa is filled with water. - Shock the water (add either chlorine or bromine sanitizer). - When you return, check water chemistry and adjust accordingly. - If you will not be using your spa for longer than 14 days and a spa maintenance service is not available, we strongly recommend you drain and winterize your spa.
Filter Replacement Guide Luxury Spa USA Page 16 Call us at 866-220-7405
Now that you know the basics, let us show you how to set up your new Luxury Spa Keypad Luxury Spa USA Page 17 Call us at 866-220-7405
Elite Series Display User Guide LCD Display Questions? Call 866.220.
Spa Operational Modes: Once the spa is powered on you can press and hold the program button for three seconds to change the spa’s operational mode. The spa has three operational modes. Standard Mode is the default operational mode which allows all functions of the spa to work. Standard mode should be used when the spa is being occupied. The LCD will display an “N” at the bottom when in Standard Mode. Economy Mode is a power saving mode that is used when the spa is not being occupied.
2 Water Pump 2 2.1 When the control system is on, if the spa is equipped with a 2nd pump, you can press this button to turn the pump on and off. Depending on the model, if Pump 2 is configured as a two-speed pump, pressing this button will change the pump from low speed to high speed and turn it on and off. 2.2 3 Pump 2 will automatically shut down after running for 30 minutes. Water Pump 3 3.
in the following sequence: Red-Green-Yellow-Blue-Purple-Cyan-White-Off 6 Timed Water Circulation 6.1 You can choose up to two daily time periods for water circulation. We recommend having your water circulate twice per day to maintain water clarity. 6.2 If the spa is in Standard or Economy mode, the water will circulate during the pre-programmed water circulation times. To program the water circulation time, press the programming button until you see Filter Time on the LCD. 6.
7 Ozone Disinfection 7.1 All Luxury Spa hot tubs are equipped with an ozone disinfection system. The ozone disinfection system helps sanitize the water and improves the efficiency of cleaning chemicals in your spa. 7.2 The Ozone disinfection system works automatically when the spa is in heating or circulation mode. The ozone will turn off when the water pump(s) and the air pump are turned on. Therefore it is important to set your daily heating and circulation cycles. 8 Preheating the spa 8.
9.3 Press the move buttons - to adjust the stare time and end time for each cycle. 9.4 Once the start and end time for each cycle is set, wait 10 seconds and the main interface will be returned. The Pre-Heating Cycle time is now set. 10 Anti-freeze protection Your Luxury Spas hot tub is equipped with anti-freeze protection. If the water temperature drops lower than 6℃（43℉) the heating function will automatically turn on.
Clock Setting Interface 13.1 When the control system is on, press the flashes. Press the up and down cursors button until the hour setting - to adjust the clock time and date. 13.2 After setting the time and date, wait 10 seconds and the LCD will go back to the main interface. The clock time and date are now set. *Disclaimer, these keypads are for multiple models. Not all units have the same functions.
System Fault Codes: Fault code Fault Solution Information F1 F2 F3 Temperature Please check the temperature sensor and its connection, sensor failure replace it if necessary. Temperature Please check the temperature sensor and its connection sensor short circuit and replace it if necessary. Temperature out of The control system detected that the temperature sensor the normal range was overheated. The heater is working but there is no water through the heat pipe or less water flow.
Luxury Spas USA Warranty This warranty covers all Luxury Spas USA branded hot tubs which are purchased directly from Luxury Spas USA Ltd. This warranty certificate is non-transferable. Shell Warranty - 10 years Luxury Spas USA warrant the shell against water loss to the customer arising from structural failure for a period of 10 years.
is sent out and discovers there is no issue, or the issue is not manufacturing related, then customer will be responsible for the service call. If a manufacturing related issue is discovered there is no charge for the technician visit. If the technician determines that any fault is not covered under this warranty, the customer is solely responsible for the cost of any parts and or labor charges.
