Full Product Manual

CLOCK INTERFACE
3.1 When
the system is powered on, press the and the LCD will flash the
HR character. You can then adjust the hour by pressing the up/down buttons.
3.2 Press the programming button again to cycle over to the minute setting. You
can then adjust the hour by pressing the up/down buttons.
4 SETT
ING WATER CIRCULATION TIME
In order for the water circulation cycle to operate correctly the clock must be set
first.
Note: We recommend having your water circulate for at least one hour per day to
keep the water clean.
4.1 To set the water circulation time, press the programing button 3 times. The HR
indicator will flash x 3
4.2 Once the hour is set, press the programming button again to set the minute
time.
Luxury Spa USA
Page 20
Call us at 866-220-7405