Full Product Manual

Before enjoying your new Luxury Spas hot tub, please
follow these important steps
Congratulations On Your New Spa!
Luxury Spa USA
Page 1
Call us at 866-220-7405
1- Before filling the hot tub, remove the plastic cover from the
filter. The filter is located in the sanitary basket. Check to make
sure there no other debris are inside the sanitary basket.
2- Make sure your hot tub is hooked to the correct voltage and
amperage for your model hot tub. All Luxury Spas hot tubs are
240V. You can find the correct amperage for your model listed in
the included User Guide. PAGE 9 FOR REFERENCE
3- When filling the hot tub for the first time, make sure the water
level is at least 2 inches above the bottom of the sanitary basket.
Use the water level sticker as a reference only making sure the
water is flowing continuously over the sanitary basket.
4- Allow your hot tub a minimum of 8 hours to heat completely
the first time.
5- When programming the hot tub for the first time, make sure to
select your filter and heater settings. As a general rule, keep the
operating temperature 6-8 degrees below your anticipated usage
temperature until about 30 minutes before use. This will save
energy and improve the hot tub’s efficiency.
6- 6.) Always keep your hot tub covered when not in use.