User's Manual

Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
PREPARING FOR INSTALLATION
System Requirements

Computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera
10.6 and up. The Web browser is used to confi gure the XWR-1750.

Power must be AC 100-240V~ 1.0A 50/60Hz.
XWR-1750 INSTALLATION
Desktop Installation
For use as a desktop device, position the XWR-1750 on a desk or other horizontal
surface with adequate room around the XWR-1750 for ventilation.
Wall Installation
The XWR-1750 Is keyholed to allow installation on a wall or ceiling. Use the
Mounting Pattern (Page 8-9) for keyhole alignment.
Hardware Setup

Attach Antennas: Connect the included Dual Band Antennas to all three
antenna ports.
NOTE: All three antennas should be installed prior to powering up the
XWR-1750 and are required for optimal performance.

WAN Connection: Connect the Ethernet cable from the modem/router
equipment provided by your Internet Service Provider (ISP) to the black WAN
port of the XWR-1750.

AC Power: Connect the included AC Adapter to the XWR-1750 fi rst and then to
the AC outlet.