User's Manual
Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
11
Safety in Hospitals: Wireless devices transmit radio frequency energy and may
affect medical electrical equipment. When installed adjacent to other equipment,
it is advised to verify that the adjacent equipment is not adversely affected.
RF Exposure Guidelines
Safety Information: The device complies with internationally recognized
standards covering human exposure to electromagnetic fields from radio devices.
Warning: Exposure to Radio Frequency (RF) Radiation:
The radiated output of this device is below the FCC radio frequency exposure
limits. Nevertheless, the device should be used in such a manner that the poten-
tial for human contact during normal operation is minimized.
The end user must avoid any extended human RF exposure directly in front of
the device, up to a distance of 20cm, when unit is on.
When servicing the equipment and selecting a location for the antennas, it
is important to note that a minimum distance of 20cm is required between
personnel and the device or antenna to comply with the radio frequency
exposure limit.
The antenna used for this transmitter must be installed to provide a separa-
tion distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
The following safety precautions should be observed:
Do not touch or move the antenna while the unit is transmitting or receiving.
Do not hold any component containing the radio such that the antenna is very
close or touching any exposed parts of the body, especially the face or eyes,
while transmitting.
Do not operate the radio or attempt to transmit data unless the antenna is
connected; this behavior may cause damage to the radio.
FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11abgn
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.