ZAP-310 Quick Install Guide PoE Injector Setup » Data Ine Connect an Ethernet cable from your router or switch to the Data In port of the included PoE Injector + Data & PWR Dut: Connect an Theme cable from the Data & PWR Out port of the included PoE Injector to the Pek Port of the ZAP-310 = AC Power: Connect the included AC Cord to the Power Input of the Included Injector first and then to the AC outlet.
LUZ Simply Connected CONFIGURATION Default IP Address The ZAP-310 1s not equipped with an Internal CPD server. If connected to a Lulus Router, configuration will be automatic, Otherwise, the IP address of the computer for login and configuration will need to be manually configured. The table below lists the default parameters of the ZAP-310.
ZAP-310 Quick Install Guide ADVANCED SETTINGS For advanced settings Information go to luxurious WARNINGS AMD SAFETY INFORMATION # Verify that the electrical circuits have appropriate grounding and overload protection. ¥ Attach only approved power cords to the device, Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. = The XAP-3I0 Is designed for indoor use ably, DO NOT place this outdoors.
LULU Simply Connected Warner: Exposure to Radii Frequency (IF) Radiation: The radiated output of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used In such a manner that the potential for human contact during normal operation ls minimized, + The end user must avoid any extended human RF exposure directly In front of the device, up to a distance of 20cm, when unit ls on.
