User Manual

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

Parameter:

Default Value

Default IP address:

192.168.0.16

Default user name:

admin

Default password:

admin

The Luxul Xen XAP-1500 default IP addresss is 192.168.0.16. If the IP address of your

router is not set to the 192.168.0.X network, a temporary static IP address must be

set on the computer being used for conﬁguration. To do so, set the IP address of

the computer to the 192.168.0.X range and then use the default IP address of your

XAP-1500 as the Gateway/Router. Once conﬁgured, set the computer IP conﬁgu-

ration back to “Obtain Automatically/DHCP.”

NOTE: Go to http://luxul.com/how-to-videos for videos about

changing the IP address of your Operating System.

Connect a Client Device



Connecting a Wireless Client Device: Connect the client device to one of the

XAP-1500 default wireless networks (LuxulXen1500_24 or LuxulXen1500_5X).

Both Wireless networks will run in Open Security mode. A passphrase is not

required until Wireless Security is conﬁgured.



Connecting an Ethernet Device: Use Ethernet cable to connect your com-

puter or device to one of the XAP-1500 LAN ports.

NOTE: Only devices that support 5GHz will see LuxulXen1500_5X

wireless network.

1. Open a Web browser, and enter 192.168.0.16. The access point login screen

will appear.

2. Enter the user name and password (default user name and default password

are both set as “admin”), and then click “OK” to login to the access point

conﬁguration interface.

ADVANCED SETTINGS

For advanced settings information go to luxul.com