User Manual

Quick Install Guide
XAP-1500
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
8
Hardware Setup

Data In: Connect an Ethernet cable from your router or switch
to the Data In port of the included PoE Injector

Data & PWR Out: Connect an Ethernet cable from the Data & PWR Out
port of the included PoE Injector to the PoE Port of the XAP-1500

AC Power: Connect the included AC Cord to the Power Input of the Included
Injector first and then to the AC outlet.
NOTE: The XAP-1500 is not a router and will need to be connected to
a network with a router in order to deliver Internet access.
Power
Source
POE
Injector
From your
Router or Switch
XAP-1500
DATA IN
DATA &
PWR OUT
The PoE Injector combines power and data to the XAP-1500
CAUTION: The XAP-1500 will only work properly when connected to
the provided PoE Injector .
CONFIGURATION
Default IP Address
The XAP-1500 is not equipped with internal DHCP server. If connected to a Luxul
Router, configuration will be automatic. Otherwise, the IP address of the com-
puter for login and configuration will need to be manually configured. The table
below lists the default parameters of the XAP-1500.