User Manual

Quick Install Guide
XAP-1500
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
4
XAP-1500 Rear Port View
PoE Injector LED Indicators
Name
Status Function
PoE
On Indicates the PoE Injector is delivering power to the connected
802.3af/at PoE enabled device
Off Indicates no power is being delivered to the connected device
Flashing Flashing: An error indicating a power fault
PWR
On Power is connected to the PoE Injector
Off Injector is not receiving power
PREPARING FOR INSTALLATION
System Requirements

Computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera
10.6 and up. The Web browser is used to confi gure the XAP-1500.

Power must be AC 100-240V~0.3A 50/60Hz.
XAP-1500 INSTALLATION
The XAP-1500 high powered access point is designed for optimal performance
as well as for simple and effi cient installation and setup. It designed for mount-
ing on the ceiling, wall or placed on a desktop or other fl at surface. Because the
signal generated by the XAP-1500 is omnidirectional, the unit should be mounted
on a ceiling or wall directly in the center of the desired coverage area. Note that
orientation of the unit is less important than the mounting location.