User's Manual

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

NOTE: Go to http://luxul.com/how-to-videos for videos about

changing the IP address of your Operating System.

Connect a Client Device



Connecting a Wireless Client Device: Connect the client device to one of the

XAP-1230 default wireless network LuxulXen1200. Wireless network will run

in Open Security mode. A passphrase is not required until Wireless Security is

conﬁgured.



Connecting an Ethernet Device: Use Ethernet cable to connect your computer

or device to one of the XAP-1230 LAN ports.

1. Open a Web browser, and enter 192.168.0.10. The access point login screen

will appear.

2. Enter the user name and password (default user name and default password

are both set as “admin”), and then click “OK” to login to the access point

conﬁguration interface.

ADVANCED SETTINGS

For advanced settings information go to luxul.com