User's Manual
User Guide
4
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
1 INTRODUCTION
Congratulations on your purchase of the Luxul Xen™ High Performance Outdoor
802.11n Wireless Access Point (XAP-1040). The XAP-1040 provides superior Wi-Fi
coverage for outdoor areas while maintaining an unobtrusive profile for use in
residential and commercial Wi-Fi installations. The ruggedly elegant XAP-1040 is
weather resistant to IP-66 specifications and can be installed directly on a wall or
on a pole with the included mounting bracket. It is also an excellent solution for
creating a point-to-point or point-to-multipoint bridge link. Powered by Luxul’s
Xen3D™ Technology, the XAP-1040 enhances data throughput and coverage by as
much as 400% over traditional Wi-Fi gear, providing for superior area coverage
and a farther reaching signal. With this high performance wireless access point,
computers and wireless devices that are compatible with 802.11b/g and/or 802.11n
can sustain maximum data rates and improved overall performance at significantly
greater distances.
The XAP-1040 features Luxul’s XenSmart™ web based management interface.
XenSmart provides a powerful, yet simple method for setting up and optimizing
the wireless network. The XAP-1040 is also XenConnect™ enabled for optimal per-
formance and installation simplicity when deployed together with Luxul Routers,
Gigabit Switches, and other Luxul products.
XAP-1040 Features:
X
Implements Patented Xen3D™ Technology for Enhanced Throughput and
Coverage
X
Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching
Signal and Maximum Data Rates
X
18dB of Receive Gain Increases Client Device Network Sensitivity and
Performance
X
Complies with 2.4 GHz IEEE 802.11n Standard. Backward Compatible with IEEE
802.11g/b
X
Supports WMM QoS Functionality to Prioritize Multimedia Traffic
X
Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK
(AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP
X
Supports up to 8 SSIDs with Individual Security Settings
X
Multiple SSIDs Support VLAN Tagging (1 VLAN per SSID)
X
Single Cable Installation with PoE (supports both IEEE 802.3af and Legacy)
X
Firmware Upgradeable
X
Easy 3 Step Setup through Web-based XenSmart™ User Interface