User's Manual

User Guide

VLAN ID: This ﬁeld is used to set the Port VLAN Identiﬁer (PVID) associated with

a particular SSID. This feature is used to create multiple wireless networks that

are not accessible to each other (i.e. Home, Guest, Control, etc.). Up to 8 VLAN

ID’s can be set (one for each Proﬁle). A smart/managed switch is required to fully

utilize this feature (see the Luxul Xen™ XMS-1024 or XMS-1008P).

To change or set a VLAN ID, simply enter a number from 1-8, then click Save, and

then Reboot for the change to take effect.

5.4 Maintenance

5.4.1 Firmware Upgrade

Firmware Upgrade: This page allows for the upgrade of the ﬁrmware on the XAP-

1040. To check for ﬁrmware updates, visit www.luxul.com/support.

1. 1. Go to the Luxul website and download the new version of ﬁrmware

2. 2. Click Browse to locate the ﬁrmware ﬁle on your computer

3. 3. Click Upgrade to perform the update

CAUTION: Do not power off the access point or computer being used

during the upgrade or the access point may be damaged.