User's Manual

User Guide
22
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
5.3.2 Wireless Profiles
Wireless Profiles: This page allows configuration of up to 8 Wireless Network
SSID’s:
X
Network Name (SSID): Sets the name of the Wireless Network. If the SSID is not
set on a profile, the name of the network will not be broadcast.
NOTE: Profile 1 is set during Quick Setup
X
Security Mode: Sets the wireless security encryption mode.
X
Encryption: This field only shows while in WPA mode. It is used to select the
encryption method WPA will use (default is TKIP & AES).
X
WEP Key: This field only shows while in WEP mode. Allows the input of a 128 bit
WEP key.
X
WPA Passphrase: Sets the passphrase for wireless network access.
NOTE: If no Network Name (SSID) is specified, the profile is not active.