User's Manual

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
13
X
Humidity of the operating environment: 5%-95% non-condensing. Do not place
the access point in an extremely dirty or damp location.
X
Keep the access point away from strong electromagnetic fields (i.e. Air
Conditioner compressors, fluorescent light ballasts, CRT monitors/televisions,
etc.), and free from vibration, dust and direct sun light.
4.6 Hardware Installation
4.6.1 Access Point Placement
This XAP-1040 implements Luxul’s Circular Polarized directional antenna technol-
ogy. For maximum efficiency, it should be aimed towards the area to which you
would like to provide coverage. With this in mind, the ideal placement option is
usually on an outside wall or pole pointed into the coverage area.
XAP-1040 Suggested Mounting Location
4.6.2 Mounting the Access Point on a Wall or Pole
The XAP-1040 can be mounted directly to a wall or pole using the included mount-
ing bracket. Once the mounting location has been selected, installation is as simple
as plugging the Ethernet cable into the RJ-45 connector and then mounting the
access point directly to the wall or pole as shown in the diagram below:
The XAP-1040 mount assembles as show above. The u-bolts may be removed and
the plate may be mounted directly to a wall using your hardware.