User's Manual

User Guide

XAP-1040 Bottom View

4.4 Inside View

For maximum weather resistance, all System LEDs and the Reset button are located

internally. Unless it becomes necessary to do so, opening the XAP-1040 is not

suggested. Note that there are no user serviceable parts. There is also a metal insert

for grounding power.

For troubleshooting, functional validation or system Reset, you will need to open

the XAP-1040. To do so, remove the 4 screws at the back of the unit. After doing so,

carefully lift the base up and to the right as demonstrated below:

View of XAP-1040 Opened

CAUTION: Before removing the cover and/or attempting to service

the XAP-1040, be sure to unplug all cables and dismount the device.

Use caution to see that no external elements are introduced inside the

enclosure and that reasonable precautions are taken to minimize static

and electromagnetic contamination of the electronic components. Avoid

touching any of the internal electronics, except in the case of a Reset.