User's Manual

User Guide
10
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
Indicator
Name
Description
WLAN
(Wireless
LAN Status)
On The wireless radio is active and wireless access is
enabled an active connection to the internet
Off The wireless radio is not active and wireless
access is disabled
BRG
(Bridge Mode)
On Bridge Mode is enabled
Off The AP is in default “Access Point” mode.
At startup, the Green Power LED will stay on while the amber LAN Link light
flashes. The blue LED will come on once the XAP-1030 radio is active.
4.2 Top View
The Top of the XAP-1030 provides one SMA antenna connector and one RJ-45 con-
nection that is used to deliver both power and data to the access point.
XAP-1030 Top View
4.3 Rear View
The Rear of the XAP-1030 has two key holes to allow for easy and flexible mounting
on a wall or other solid surface. For desktop or shelf mounting, it also has guides
for placement of the four rubber feet provided.
XAP-1030 Rear View