User's Manual

User Guide
6
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
2 XAP-1031/1032 SPECIFICATIONS
Standards

IEEE 802.11n

IEEE 802.11b/g

IEEE 802.3af
Hardware

LAN Port: 1 RJ45 10/100 Mbps data and power input

7dBi Circular Polarized Directional Antennas
XAP-1031-1 antenna, XAP-1032-2 antennas

System LEDs: Power, WLAN active, LAN link/activity, Bridge
mode active.

RJ45 Connection LEDs: The RJ45 connection on the top of the
unit has two LEDs that indicate power and LAN link/activity.
RF Information

Frequency Band: 2.401 – 2.473GHz

Operating Channels: 11
Available Transmit
Power

2.401 – 2.473GHz (IEEE802.11g/n):
Up to 36dBm EIRP
w
30dBm @ 6~9Mbps / MCS0
w
29dBm @ 12~18Mbps / MCS1-2
w
27dBm @ 24~36Mbps / MCS3-4
w
26dBm @ 48~54Mbps / MCS5-7

2.401 – 2.473GHz (IEEE802.11b):
Up to 36dBm EIRP
w
30dBm @ 1~11Mbps
Available Receive Gain

2.401 – 2.473GHz (IEEE802.11g/n):
Up to 18dBm

2.401 – 2.473GHz (IEEE802.11b):
Up to 18dBm
Receive Sensitivity
(Typical)

2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm

2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm

2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm
Wireless Operation
Modes

Access Point

Point-to Point Wireless Bridge

Point-to-Multipoint Wireless Bridge
Management and
Security

XenSmart™ Remote Web-based Management

WEP (128 bit)

WPA-PSK (TKIP, AES, TKIP&AES)

WPA2-PSK (AES)

WPA-PSK/WPA2-PSK Auto (TKIP&AES)

Web Based Firmware Upgrade

QoS: Wireless Multi-Media (WMM) Extensions
Certifications

FCC Part 15, Class B