User's Manual

User Guide
4
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
1 INTRODUCTION
Congratulations on your purchase of the Luxul Xen™ Commercial Grade Dual
Directional 802.11n Wireless Access Point (XAP-1031/1032). The XAP-1031/1032
provides superior directional Wi-Fi coverage in a sturdy and versatile metal
enclosure for deployment in post-construction residential and commercial Wi-Fi
installations. The XAP-1031/1032 is designed to be placed inconspicuously above
ceiling tiles, in an attic, or other non-public indoor location. It has two directional
antennas that can be mounted and “aimed” towards the desired coverage areas—
further optimizing the Wi-Fi signal. Powered by Luxul’s Xen3D™ Technology, the
XAP-1031/1032 enhances data throughput and coverage by as much as 400% over
traditional Wi-Fi gear, providing for whole home or small office coverage with a
single access point. With this high performance wireless access point, computers
and wireless devices that are compatible with 802.11b/g and/or 802.11n can sustain
maximum data rates and improved overall performance at significantly greater
distances.
The XAP-1031/1032 features Luxul’s XenSmart™ web based management interface.
XenSmart provides a powerful, yet simple method for setting up and optimizing
the wireless network. The XAP-1031/1032 is also XenConnect™ enabled for optimal
performance and installation simplicity when deployed together with Luxul
Routers, Gigabit Switches, and other Luxul products.
XAP-1031/1032 Features:
X
Implements Patented Xen3D™ Technology for Enhanced Throughput and
Coverage
X
Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching
Signal and Maximum Data Rates
X
18dB of Receive Gain Increases Client Device Network Sensitivity and
Performance
X
Complies with 2.4 GHz IEEE 802.11n Standard. Backward Compatible with IEEE
802.11g/b
X
Supports WMM QoS Functionality to Prioritize Multimedia Traffic
X
Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK
(AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP
X
Supports up to 8 SSIDs with Individual Security Settings
X
Multiple SSIDs Support VLAN Tagging (1 VLAN per SSID)
X
Single Cable Installation with PoE (supports both IEEE 802.3af and Legacy)
X
Firmware Upgradeable