User's Manual

User Guide

Firmware Upgrade: This page allows for the upgrade of the ﬁrmware on the XAP-

1031/1032. To check for ﬁrmware updates, visit www.luxul.com/support.

1. Go to the Luxul website and download the new version of ﬁrmware

2. Click Browse to locate the ﬁrmware ﬁle on your computer

3. Click Upgrade to perform the update

CAUTION: Do not power off the access point or computer being used

during the upgrade or the access point may be damaged.

5.4.2 Factory Defaults

Factory Defaults: Use this page to return the XAP-1031/1032 to the original default

settings. Please note that using this feature will reset ALL values and custom

changes or settings that have been made to default settings. It is recommended to

backup current settings prior to performing a Factory Default. To restore factory

defaults, select Yes in the drop down menu and then select Save and then Reboot

for the settings to take effect.

CAUTION: Restoring default conﬁguration will re-set all of your settings

to factory defaults. The XAP-1031/1032 will now have the

default IP address 192.168.0.13. For login, default user name

will be “admin” and default password will be “admin.”