User's Manual

User Guide
10
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
(Green).
The following table describes the LED functionality:
Indicator Name Description
Bridge Mode
On Bridge Mode is enabled
Off The AP is in default “Access Point” mode.
WLAN Status
On The wireless radio is active and wireless
access is enabled an active connection to the
internet
Off The wireless radio is not active and wireless
access is disabled
LAN Link/Activity
On There is an active Ethernet connection
Flashing Indicates Ethernet activity
Off There is no active Ethernet connection
Power
On The power is on
Off No power, check power connections
At startup, the Green Power LED will stay on while the amber LAN Link light
flashes. The blue LED will come on once the XAP-1010 radio is active.
4.2 Rear View
The rear of the XAP-1010 provides one RJ-45 connection that is used to deliver both
power and data to the access point. It also provides a reset button for restoring the
access point to factory default settings.