User's Manual

User Guide

DO NOT pull any connected cable with force. When disconnecting cables, do so

by disconnecting ﬁrst from the access point. When reconnecting, connect the AP

ﬁrst and then the Power/data source.

When installing the access point, be sure it is ﬁrmly secured to the wall or

mounting bracket.

Accessories of this access point, such as mounting screws, the POE injector and

power supply may be dangerous to small children under 3 years of age. KEEP All

ACCESSORIES OUT OF THE REACH OF CHILDREN!

The access point may become hot when in use for extended time periods. This is

normal and is not a malfunction. DO NOT install this access point where it will

be exposed to paper, cloth or other ﬂammable materials. If not using the electri-

cal box included with the unit, ALWAYS use a properly shielded and UL listed

electrical box for installation.

The XAP-1020 contains no user-serviceable parts. If the access point is not

working properly, contact your dealer and ask for help. DO NOT attempt to

disassemble the access point.

4 HARDWARE FEATURES AND INSTALLATION

The XAP-1020 high powered access point is designed for optimal performance as

well as for simple and efﬁcient installation and setup. It implements Luxul’s circular

polarized directional antenna technology and is packaged for installation on a wall

or ceiling. Because the signal generated by the XAP-1020 is directional in nature, the

unit should be placed in a location that allows the antenna face to be “pointed”

towards the desired coverage area. Typically this would be on a top ﬂoor ceiling

pointed downwards in a multi-story installation; or for single level or two level

layouts, on a wall pointed towards the desired coverage.

4.1 Front View

For maximum discretion, the front of the XAP-1020 has no LED indicators. It

consists simply of the access point cover with the Luxul icon that indicates proper

top/bottom installation orientation of the access point.