User's Guide

The output power of the ampliﬁer is set and tested during manufacturing. There are no

user modiﬁable parameters in the ampliﬁer. The Luxul Shock-WAV Wi-Fi Signal Booster

incorporates a Digital Automatic Gain Control (D-AGC) that ensures a consistent and

approved output power.

Please reference section 4 for installation instructions.

2 - SHOCK-WAV WI-FI SIGNAL BOOSTER SPECIFICATIONS

Operating Range 2400 - 2483 MHz

Transmit Power (27dBm)

Transmit Gain 20dB Typical (under D-AGC Control)

Receive Gain 15dB Typical

TX Input Power +8dBm to +24dBm

Noise Figure 3.5dB Typical

LED Indicators TX\RX Solid for RX/Blink for TX

Power Consumption 400mW (RX) 5W (TX) Max

Power Options Power Over Ethernet (POE)

Operating Voltage 12 to 48VDC

Operating Temp -40F (-40c) to +158F (+70c)

Dimensions W: 4” (101.6 mm) L: 6” (152.4 mm) H: 1.7” (43.18mm)

Enclosure Outdoor, Aluminum

RF Connectors Two (2) Type N Female

Weight 1.5lbs. (68Kg)

3 - GETTING STARTED

3.1 PRECAUTIONS

Before installing the Shock-WAV Wi-Fi Signal Booster and AP-5181 verify the following:

• Do not install in wet or dusty areas without additional protection. Contact

a Luxul Wireless representative for more information.

• Verify the environment has a continuous temperature range between

-40F to +149F (-40c - +65c).