Tus neeg siv phau ntawv
XP976
Rechargeable Utility LED
Flashlight
USER MANUAL
Operation Instructions
Constructed with aircraft-grade aluminum
LPE optics
Patented TackGrip molded rubber grip
High quality wrist lanyard
Rear tactical on/off button
1x18650 1800mAh Li-ion rechargeable batteries
Micro USB charge port access via rotating dial (USB cable included)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
The XP976 has a Limited Lifetime Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
Low
High
ANSI/PLATO FL1 STANDARD
30 lm
450 lm
LUMENSMODES
19h
2h 30m
RUN TIME
42m
163m
Medium 150 lm 7h 30m 87m
BEAM
DISTANCE
Strobe 450 lm -- --
USB
Rechargeable
Charging Instructions
On/Off: Press and release the button on the tail cap to turn the
light on and off.
Cycle Modes: Press button on tail cap quickly to cycle through
modes (High/Medium/Low). If light remains in a single mode for
longer than 3-5 seconds, the next press of the button will turn the
light off.
Light automatically resets to High mode when turned off.
Hidden Strobe On/Off: Press and hold the button for 3 seconds
to activate hidden strobe. Flashlight will remain in hidden strobe
mode until it is deactivated by pushing and holding the button
for 3 seconds again.
To charge the flashlight, reveal the charge
port on the head of the light by rotating
the charge port cover to the left.
z
Rechargeable battery is sealed and replacement is not necessary.
The XP976 has a charge time of approximately 3 hours.
Plug the small end of the Micro-USB
charging cable (included) into the port on
the flashlight.
Plug the opposite end of the charging
cable into a 5V USB power source.
The indicator light near
the charge port will be
red while the light is
charging, then turn green
to indicate the battery is
fully charged.