User Manual

3
AAA
Batteries
Compact Waterproof
LED Headlamp
IPX7 Waterproof
Non-slip adjustable headband
Dual button intuitive mode selection
LPE Optics
Durable ABS and rubberized compact design
Soft, reective headband
PACK740
Features
Operation Instructions
Usage and Maintenance
Medium
High+
ANSI/PLATO FL1 STANDARD
184 lm
374 lm
LUMENSMODES
7h 30m
2h
RUN TIME
105 m
162 m
High 342 lm 3h 30m 159 m
BEAM
DISTANCE
White 41lm 10h 17m
Red
Green
Spot Modes
Flood Modes
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
Battery Replacement: In a dry environment, locate the
two clear plastic tabs along the side of the headlamp
housing. Gently, push tabs outward using both thumbs.
The battery cover will pop up and seperate from the
main headlamp housing. Remove old batteries. Insert
new batteries into the designated battery slots, follow-
ing the symbols for proper arrangement. To reinstall the
battery cover, take note to match the clear tabs on the
main housing to the proper orientation on the battery
cover, then carefully reinstall the battery cover to the
headlamp housing by gently pressing the two together.
Check that a proper seal has been made by firmly hold-
ing the housing in one hand and gently pulling against
the headband hinge with the other hand.
Right Button: Spot LED On/Off
Quick Press = Spot High On/Off
2 second press from any mode = High+ mode
Left Button: Cycle all modes / last mode recall
Quick Press from Off position = Last mode recall
Quick Press from any mode = Cycle through modes
2 second Press = Strobe On/Off any mode
Product Warranty
Limited 1 year Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
[e-mail].