Owner Manual

USER MANUAL
Operation Instructions
Durable ABS and rubberized compact design
LPE optics
Dual button operation
Non-slip adjustable headband
45° adjustable head
IPX4 waterproof rating
Batteries included (3 AAA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP347 has a Limited 90-Day Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to [e-mail]
Product Warranty
3
AAA
Batteries
Ultra-Bright Multi-color
Headlamp
LP347
10m
125m
45m
BEAM
DISTANCE
Green
55 lm
5h
15m
--
Red
High
ANSI/PLATO FL1 STANDARD
30 lm
400 lm
LUMENSMODES
5h
3h
RUN TIME
Low
125 lm
4h 30m
Spot Modes
Flood Modes
Strobe
400 lm
--
White
60 lm
5h
20m
Spot On/O & Cycle Modes: Press and release the button on the
right of the headlamp to turn spotlight on. Press button
repeatedly to cycle through modes (High/Low/Strobe).
Flood On/O & Cycle Modes: Press and release the button on
the left of the headlamp to turn ood light on. Press button
repeatedly to cycle through modes (Red/White/Green).
The LP347 uses 3 AAA batteries.
To replace the batteries, rst locate the plastic tab on the top of
the headlamp. Gently push the tab up and outward using your
thumb to pop the battery cover loose and open it. Remove the
old batteries and insert new batteries according to the (+/-)
symbols in the battery tubes. For best results, we recommend
using brand new alkaline batteries that are the same voltage and
brand.
To re-attach the battery cover, press the headlamp housing and
battery cover together until it clicks into place. Check that the
battery cover is secured by gently tugging on the headlamp
straps while holding the main housing rm.
If you know it will be a while between uses, we suggest removing
the batteries from the headlamp and storing it in a dry, protected
place.