Owner Manual
USER MANUAL
Operation Instructions
Compact-durable design
Diused lens area light
High quality collapsible carabiner
Magnetic base
Lightweight
IPX4 waterproof rating
Batteries included (3 AAA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP178 has a Limited 90-Day Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
Hanging LED Area Light
LP1503
3
AAA
Batteries
Magnetic
On/O: Press and release green power button (opposite of the
diused lens).
Cycle Modes: Press power button repeatedly to cycle through
modes (Low/Medium/High).
The LP1503 uses 3 AAA batteries.
To replace the batteries, turn the black plastic base counterclock-
wise to loosen it, then gently pull base away from the lens to
remove it. Remove the old batteries and insert new batteries
according to the (+/-) symbols in the battery tubes. For best
results, we recommend using brand new alkaline batteries that
are the same voltage and brand.
Re-attach the base by aligning the arrow on the green ring
around the lens with the “Open” arrow printed on the base. Lightly
press the lens and base together, then turn clockwise until tight.
If you know it will be a while between uses, we suggest removing
the batteries from the lantern and storing it in a dry, protected
place.
Low
High
ANSI/PLATO FL1 STANDARD
35 lm
118 lm
LUMENSMODES
20h
5h 15m
RUN TIME
7m
15m
Medium 75 lm 9h 11m
BEAM
DISTANCE