User Manual

2
D
Batterie s
High-Output Universal
Large Flashlight
Durable aluminum construction
Long range LPE Optics
Heavy duty ashlight
TackGrip molded rubber grip
Ergonomic side button
O-ring sealed, IPX6
LP1100V2
3 Modes: High/Low/Strobe
Strobe
High
ANSI/PLATO FL1 STANDARD
360 lm
360 lm
LUMENSMODES
-
7h
RUN TIME
-
270 m
Low 120 lm 15h 100 m
BEAM
DISTANCE
Product Warranty
Features
Operation Instructions
Usage and Maintenance
On/Off: Press and release button.
Cycle modes: From High mode, press button to cycle
through modes (High/Low/Strobe).
Automatically resets to High mode when off for longer
than 2 seconds.
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Limited Lifetime Warranty against manufacturer’s de-
fects. For warranty claims contact LuxPro by calling
801-553-8886 or sending an email to info@simpleprod-
ucts.com.
Battery Replacement: In a dry environment, unscrew the
tailcap by turning counter clockwise. Remove batteries.
Insert the new batteries into the tube (+) end first. Care-
fully reinstall the tailcap by pressing lightly while turning
clockwise.
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.