Tus neeg siv phau ntawv

USER MANUAL
Operation Instructions
Durable ABS and rubberized compact design
LPE optics
Dual button intuitive mode selection
Non-slip adjustable headband
IPX7 waterproof rating
Rechargeable 250mAh Li-ion battery (USB cable included)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
The LP738 has a Limited 1-Year Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to [e-mail]
Product Warranty
Compact Rechargeable
LED Headlamp
CUBI738
Medium
High+
ANSI/PLATO FL1 STANDARD
180 lm
362 lm
LUMENSMODES
2h 30m
1h
RUN TIME
122m
183m
High 344 lm 1h 15m 172m
BEAM
DISTANCE
White 14 lm 3h 30m
14m
On/Off: Press and release the button on the right side of the
headlamp to turn on and off.
High+ Mode: From any mode, press and hold the button on the
left side of the head lamp for 3 seconds to turn on High+ Mode.
Cycle Modes: Press and release the button on the left side of the
headlamp repeatedly to cycle through modes (High/Medium/-
Flood Low/Flood Red/High+). Pushing the left button after the
headlamp has been turned off will recall the last mode used.
Strobe Mode: From any mode, press and hold the left button for
3 seconds to switch to Strobe mode.
USB
Rechargeable
Charging Instructions
Rechargeable battery is sealed, and replacement is not necessary.
The LP738 has a charge time of approximately 1 hour.
The LP738 uses a Li-poly; 3.7V 150 mAh rechargeable battery.
To charge the headlamp, locate the charge port on the bottom of
the light (opposite of the on/off button).
Plug the small end of the Micro-USB charging cable (included)
into the port on the headlamp. Plug the opposite end of the
charging cable into a USB power source.
The blue battery indicator lights on the side of the headlamp will
light up to indicate that the light is charging. The headlamp is fully
charged when all 4 battery indicator lights are lit.