User Manual

3
AAA
Batteries
IPX4 Waterproof
Non-slip adjustable headband
Dual button intuitive mode selection
LPE Optics, Multi-color COB LED area light
Durable ABS and rubberized compact design
Battery: 3 AAA
Multi-color LED Headlamp
BROADBEAM323
Features
Operation Instructions
Usage and Maintenance
Low Spot
High+
ANSI/PLATO FL1 STANDARD
50lm
300 lm
LUMENSMODES
6h
3h
RUN TIME
20m
85 m
High Spot 220 lm 4h 40m
BEAM
DISTANCE
High White 85lm 5h 30m 20m
Low White lm 8h 30m
5m
Green 51lm 7h m
5m
Red 15lm 3h
1m
Spot Modes
Flood Modes
30
3
4
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
Battery Replacement: In a dry environment, locate the
two plastic tabs along the side of the headlamp hous-
ing. Gently, push tabs outward using both thumbs. The
battery cover will pop up and seperate from the main
headlamp housing. Remove old batteries. Insert new
batteries into the designated battery slots, following
the symbols for proper arrangement. To reinstall the
battery cover, take note to match the two tabs on the
main housing to the proper orientation on the battery
cover, then carefully reinstall the battery cover to the
headlamp housing by gently pressing the two together.
Check that a proper seal has been made by firmly hold-
ing the housing in one hand and gently pulling against
the headband hinge with the other hand.
Right Button: Spot LED Modes
Quick Press = On/Cycle Modes/Off
2 second press from any mode = High+ Mode
Left Button: Flood Modes / Strobe
Quick Press = On/Cycle Modes/Off
2 second Press = Strobe On/Off any Mode
Product Warranty
Limited 1 year Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
[e-mail].