USER MANUAL Please read the instructions before use
I. Product parameters a. Compatible mobile phone system: Android5.0 (inclusive) or higher, iOS9.0 (inclusive) or higher b. Main control: RTL8762CK c. Screen: 1.28 full circle Resolution: 240*240 II.Operating instructions Full screen touchable charging port up button sensor down button 1.
2.
3. Charging instructions a. Please use the charging cradle equipped with the product to align the contacts on the back of the host to charge (please ensure that the battery is sufficient for the first use. If the battery cannot be turned on normally at low power, please charge it before operating. Please charge correctly as shown in the right picture) b. Do not use a power adapter with an output current of more than 2A to charge 4. Download and install the "Da Fit" APP 1).
6.Call Bluetooth connection: turn on the watch "TURN ON", and the "MX-FIT22_PHONE" Bluetooth pairing will pop up automatically in the mobile phone. Click pairing.
the watch to dial, control the mobile phone to make a call, listen to music, and view the call record information of the watch. If you click Unpair, when you need to pair the Bluetooth for a call again, open the watch "Enable call function", open the phone settings → Bluetooth option, view all devices, and click "MX-FIT22_PHONE" to connect. Add contacts: enter the "Da fit" app, click "quick communication" → select contacts to add (at present, up to 8 contacts can be added) 7. Watch function mode a.
Custom dial: enter the "Da fit" app and click - > dial selection - > Edit to select the dial you want. Find more dials: enter the "Da fit" app and click "dial selection" - > more dial settings. b. Step counting: wear the watch normally, and the watch displays the current exercise steps, distance and calories (the data of the day before 0:00 a.m. every day) c. Sleep monitoring: wear a watch to sleep. The watch will automatically monitor the length of deep sleep, light sleep and total time yesterday.
f. Blood pressure: click the screen in the blood pressure interface to measure the current blood pressure value. The icon flashes as in the test and slides right to exit. It can also be measured manually on the app side blood pressure interface (the data is only for reference and not for medical use) g. Blood oxygen: click the screen in the blood oxygen interface to measure the current blood oxygen value.
k. Information push: this watch supports phone / SMS / wechat / QQ / other application information push. This page only saves the last 5 information records, and you can turn on the corresponding switch according to your needs. (note that when the Android mobile phone opens the information reminder, it must set the notification right of the app to the mobile phone, otherwise the watch will not receive the reminder) l.
tension, will make the upper and lower blood pressure measurements more deviations. Why can't user take a hot bath with the watch? The ambient temperature during bathing is relatively high, which will produce a lot of water vapor, and the water vapor is gaseous, its molecular radius is small, and it is easy to seep into the gap of the watch.
phone, SMS, and mobile client) Precautions Do not throw this product into the fire to avoid explosion This product is waterproof only for cold water. If it is used for hot water, it may cause white fog in the lens The battery life of this product varies with the use environment and use mode Disclaimer: This product is not a medical device. The bracelet and its application program are not used for diagnosis, treatment, or prevention of diseases and diseases.
guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
