MX-FIT USER MANUAL
Please read the manual before use. The information in this document won't be modified or extended in accordance with any notice. The watch should be charging 2 hours at least before use. 1. Caution: 1.1 Waterproof and dustproof The watch supports waterproof and dustproof. Please follow below guidelines to maintain the waterproof and dustproof function. Otherwise your device might be damaged. · Do not use watch under the strong pressure water.
· If the watch is dropped or hit, the waterproof and dustproof function may be damaged. · Do not disassemble your watch. The waterproof and dustproof function may be damaged. · Do not use watch in extremely high or low temperature environments. · Do not use blowers and other heated equipment to dry the watch. · In sauna room, the waterproof function may be damaged. 1.2 Cleaning and management of MX-FIT Follow the below points to ensure that MX-FIT is operating normally and looks good.
· After exercising or sweating, please clean your wrist and strap. Use water to clean MX-FIT and dip a small amount of alcohol to wipe, then dry it thoroughly. · If MX-FIT is stained or infiltrated with other objects, please use wet soft toothbrush to clean it. 1.
Memory:RAM 128Kb+ ROM 64Mb Capacitive touch screen 1.4” 240*240 pixel IPS Function:Temperature, Heart Rate, Push Dial, Do not disturb, Daily activity, Sleep, Notification (G-mail, Facebook, Skype, WhatsApp and so on) Battery Lithium-ion 3.7V/160mAh 3.Product details 3.1 Product details (1) Power on: When the watch is in the off state, press the button for 3 seconds to turn it on, and the main page of the watch will be displayed after booting.
(3) Bright screen: When the watch is in the state of interest screen, you can touch the screen bright screen. If the turn button is turned on in the APP, the user can also achieve the bright screen by turning the wrist, and the watch is displayed after the screen is bright. Main interface. (4) Shutdown: Click the Setting icon, click System - Shut down, click to shut down. 4. Products quick into 4.
4.2 Clock Display Setting method: Power on,when the watch in clock mode, please long press middle screen and set different clock interfaces if you like. 5.Product quick use 5.1 Download and install You have to download and install the " HitFit Pro " App from APP Store or Google Play Store: 5.2 Connection and Synchronize data 5.2.1 Bluetooth connection 4.2.1.
Open HitFit Pro -- Click “Device” in bottom -- “Device Connection” --Searching Device. Click OK and Click Pair to bind watch as below. Open“HitFit Pro”- left slide menu bar - Device - select the corresponding device icon - search for the corresponding Bluetooth address pairing 5.2.1.2 For IOS: Connect step 1: Open“HitFit Pro” app, “Device ” on “Device connection” screen to search Bluetooth devices nearby, find watch name MX-FIT and paired it in app.
Connect step 2: Now the Bluetooth menu interface displays MX-FIT connected successfully as below picture shows. After connected successfully, as shown by the icon on the left. 5.2.2 Synchronizing data Pair your watch with " Hitfit Pro " App, Press " Your data will be shown on App accordingly. Notice: " to sync data.
Please don’t shut the Bluetooth notify service when you are clearing software by background or close background application software. It will affect the sync function between watch and phone if shut it. 5.3 Basic function 5.3.1 Daily activity (1) Function introduction: The watch will display the user's total number of steps on the day, walking distance, calories burned on the same day, and the data will be cleared at 0 o'clock every day.
the screen will automatically go out. (2) Operating instructions: Heart rate measurement: slide to the left on the main interface and click the heart rate static icon to switch to the heart rate measurement interface. Once the interface is entered, the measurement will start. During the measurement, the interface value will be zero. After the measurement is completed, the value will be displayed. If the result cannot be detected, it will always be displayed. The display value is zero until standby. 5.3.
measurement will start. The left data is for Body surface temperature, it is changed in real time. The right data is for Body temperature, measuring 60s to complete the measurement. During the measurement, the interface value will be show “--.-”. After the measurement is completed, the value will be displayed. Remark: During testing body temperature, environment temperature require within 18-30℃. 5.3.5 Sleep (1) Function introduction: The watch will display the user's sleep time the night before.
advance) 5.3.8 Music After connected with the Bluetooth, you can manipulate Mobile to play music and adjust the volume, voice will come out from mobile phone. 5.3.9 Timer Swipe left on the main page and click the stop icon static icon to switch to the stopwatch interface. Click to start timing. During the timing, you can pause/start switching with a single touch. Slide the stopwatch function to the right of the stopwatch interface and return to the static function page. 5.3.
Vibration: set vibration intensity. System: Including System version, Shut down, Reset setting. 6. Caveat Please follow the doctor's instructions and measure the results of self-diagnosis and treatment. Users with blood circulation disorders and blood diseases should be treated under the guidance of a doctor. The measurement results of this product are for reference only and are not intended for any medical use or basis.
Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.
