User's Guide

MAXWEST Bluetooth Speaker
MX-BT4 USER GUIDE
To correctly operate the MX-BT4, please read this manual prior to using it. All the content within
this manual is from default sengs, and we are not responsible for the consequences caused by
fault or oversight of this manual.
FEATURES:
2.0CH Portable Bluetooth Water-Resistant speaker
Water resistant IPX5, splash-Resistant, Rain-Resistant
Perfect for beaches, poolside, boat and more outdoor acvies
Dedicated buon for TWS funcon, achieve true wireless Bluetooth playing with double
enhanced stereo sound;
With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such as your
mobile phone, notebook, iPhone or iPad
Bluetooth operang range of 10 meters in an open area
Supports USB and Micro SD card
Supports FM Radio
Supports AUX-IN funconality
Built in 3000mAh rechargeable Lithium baery
Built-in Sturdy handle
SPECIFICATION:
Speaker Size: 3 inch*2
Horn output: 9.5W*2, 4Ω
Baery Capacity: 3000mAh
Frequency Response: 100Hz-16kHz
Playme at max volume: 2.5H
Product size (L x W x H): 354 x 138 x 183 mm
Content:
1 – MX-BT4 Speaker
1 – Micro USB Charging cable
1 – AUX Cable
1 – User Manual
INSTRUNCTION FOR APPEARANCE AND KEY:
Bluetooth Mode:
1.Press the Power buon to “ON”, the LED light will turn blue and flicker quickly [If it’s the first me
you turn on, skip to step 3]
2.Press the Mode Switch Buon to Bluetooth Mode, you will hear “Bluetooth Device is Ready to Pair”
3.Acvate your Bluetooth device and Search for available Bluetooth Devices.
4.Look for the Bluetooth Device name “MX-BT4” and connect to it. Once you have connected, the blue
LED light will flicker slowly, and you will hear “Bluetooth Device Connected Successfully”.
5.Play Music or any audio file and enjoy
6.Press the forward or backward buon on the speaker or your device to repeat/skip the song
7.Press the Play/pause buon on the speaker or your device to Play/pause
8.Adjust your Volume by long pressing the Forward/Backward buon or by your device.
Playing music from USB disk & Micro SD card:
1.Press the Power buon to “ON”, the LED light will turn blue and flicker quickly
2.Press the Mode Switch Buon to Micro SD or USB Mode, you will hear “Music Play Mode” and the
stored Media Files will start to play
3.To Select songs, short press the Forward/Backward buon
4.To adjust the volume, Long press the Forward/Backward buon
5.To Play/pause, press the play/pause buon
Remark: Under Bluetooth playing mode, insert Micro SD or USB will disconnect the Bluetooth and
switch to play the USB or Micro SD card. You can press the MODE buon to switch to Bluetooth mode
again.
FM Radio:
1.Insert an Audio cable to the AUX port, as the FM Radio uses it as the Antenna
2.Press the Power buon to “ON”, the LED light will turn blue and flicker quickly
3.Press the Mode Switch Buon FM Radio Mode, you will hear “Radio Mode”
4.To Change Radio Staon, short press the Forward/Backward buon
5.To adjust the volume, Long press the Forward/Backward buon
6.To Auto Search FM Staons, press the play/pause buon
TWS Funcon:
1.Turn on two idencal speakers you want to pair, please noted they must be the same BT paring
name, both under BT mode. Only need to set up one of the two units;
2.Long press “PLAY/PAUSE” buon for around 4 seconds, speaker will make a tone “di” to start pairing,
and make “di” voice for 3 mes once successfully paired;
3.Make Bluetooth connecon with your mobile phone to play music by the two paired Speakers to
create more powerful surround sound effect.
4.When you want to exit the TWS mode, long press “PLAY/PAUSE” buon (of the unit you set at
beginning) again to exit the TWS funcon.
Remark: Under the TWS mode, if you connect your mobile phone to the unit (you set at beginning) via
the provided audio cable, it will start to play AUX via TWS funcon, under this status, you cannot
switch to Bluetooth mode by pressing the Mode buon.
AUX-IN:
For other compable music devices or your MP3/MP4 players, use the AUX Port with the provided
AUX Cable:
1.Insert an Audio cable to the AUX port
2.Press the Power buon to “ON”, the LED light will turn blue and flicker quickly
3.Press the Mode Switch Buon AUX Mode, you will hear “AUX Input Mode”
4.All Funcons are controlled by the external device
Remarks:
1.When Bluetooth connecon with your mobile phone, there will be a baery icon indicang the
speaker baery volume on your phone.
2.Press the MODE buon to switch the different modes, the order is Bluetooth, USB disk, Micro SD,
FM radio and AUX-IN.
3.When the speaker Bluetooth connected with one mobile device, user can long press the TWS buon
to disconnect the previous device, then make Bluetooth connecon with another mobile device;
4.Default volume is at 50% status of max volume;
5.Long press Mode buon to turn the RGB on/off;
6.When baery voltage low, the speaker will prompt “Baery Is Low, Please Recharge In Time”;
7.Turn the power buon to “off” while without use.
How to charge:
1.The charger is not included in the accessories. Please use the Universal 5V/1A charger to charge this
device, and we are not responsible for any damage caused by using other charger.
2.Power off the unit, put the provided charge cable into the charge slot of unit, connect the other end
to PC or other charger with 5V output.
3.Charge me should be 4-6 hours. The light is red while charging, and the indicator light will switch
off when full charged.
(When playing music during charging, please put the volume to middle, because for some music with
heavy bass, the charger may not be able to afford the high current temporarily under the maximum
volume.)
4.In order to prolong the life of baery, please do not charge more than 8 hours.
Warning
Any changes or modificaons not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
(1)this device may not cause harmful interference
(2)this device must accept any interference received, including interference that may cause undesired
operaon.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no guarantee that interference
will not occur in a parcular installaon If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiaon Exposure Statement:
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled
environment.
1.AUX-In Port
2.Micro USB Port / USB Port
3.Micro SD Card Slot
4.Baery Indicator
5.Backward/Volume Down Buon
6.Forward/Volume Up Buon
7.Play/Pause Buon
8.Mode Buon (Switch Bluetooth, USB,
Micro SD, FM, and AUX-IN)
9.TWS Buon
10.Power ON/OFF Buon