Instructions / Assembly

2 / 16
Table of Contents ....................................... 2
Parts List & Hardware .................................... 3
Assembly and Installation
Assembly of the right and left frame ......................... 4
Attach lower cross supports and crank rod ................... 5
Position at panel mounting plate ........................... 6
Attach at panel mounting plate ............................ 7
Attach lower shelf to frame ................................ 8
Install the upper cross bar ................................. 9
Flip the unit upright ...................................... 10
Attach upper shelf to frame ................................ 11
Install mounting hardware to display. . . . . . . . . . . . . . . . . . . . . . . . . 12
Attach display to unit ..................................... 13
Install the locking system ................................. 14
Unit complete .......................................... 15
Tools Recommended
- Phillips Screwdriver
- Soft Surface
- Marker
ATTENTION!
Do not fully tighten screws until completely assembled
A FLAT PANEL TV CART THAT FITS YOU
This unit was built with you in mind and every detail was carefully crafted.
The following assembly guide is best accomplished with two people. If
you have any questions or concerns give us a call at: 1-800-323-4656 or
email at: [e-mail]
Table of Contents