User Manual

12
Pulse
Offers a steady pulse at a programmable rate. Similar to the Strobe special effect (below), but
the light fades on and off.
Hue: Selects the light color (0° to 360°).
Saturation: Determines the color intensity from 100% (full color) to 0% (white light).
Pulses/Minute: Sets how many times the light will pulse each minute (1 to 200).
Siren
Simulates the ashing lights of a police car or emergency vehicle.
Colors: Select the color combination of ashing lights. Choose red, blue, and white; red and
blue; red and white; blue and white; blue; red; or SAE Amber.
Flash/Cycle: Set the number of times each individual color will ash within the cycle. Choose
from 1 to 4 times per cycle.
Cycles/Minute: Determines how many repetitions of the cycle will occur each minute. Choose
from 10 to 360.
Duration (%): Determines the percentage of time the light is illuminated in each cycle. Select
from a range of 10% (shortest duration) to 90% (longest duration).
Strobe
Offers a steady, ashing light at a programmable rate.
Hue: Selects the light color (0° to 360°).
Saturation: Determines the color intensity from 100% (full color) to 0% (white light).
Frequency: Changes the number of ashes per second (1 to 25).
Duration (%): Determines the percentage of time the light is illuminated in each cycle. Select
from a range of 10% (shortest duration) to 90% (longest duration).