User Manual
8
Connecting to the Conductor App
Troubleshooting
Specications
1. Enable Bluetooth on your device. Then open the Conductor app on your device.
2. Power on the Cello.
3. The app will prompt you to connect the Cello to the app. Once you do, the light is connected
and ready to use with the app.
4. To disconnect, exit the app.
• If you encounter any problems, rst try turning the device off and then on.
• If the problem persists, remove the battery for 15 seconds, and then restart.
• If the Cello’s LED array seems dim at higher brightness settings, the problem may be with the
battery. Make sure to use only batteries supplied with the Cello 10 or batteries recommended
by Luxli. Other batteries may behave differently and affect the performance of the unit.
•
Go to www.luxlilight.com to make sure you have the most recent rmware update. If a new
rmware version is available, follow instructions on how to download it to your light.
Light panel
176 RGBW LED
Bluetooth version
4.2 LE
Battery mount
Sony L-Series
DC power input
2.1 mm 7–15 V
Dimensions (W × H × D)
9.5 × 3.7 × 0.8 in. (24 × 9.3 × 2 cm)
Weight
13.9 oz. (394 g)