Dimensions Sheet

2 1/2” 1 3/8”
2 3/8”
2 3/8”
1 5/8”
1 1/2”
2.58”
1.87”
1.4”
2”
2 7/8”
2 5/8”
4 7/8”
4 7/8”
1
2
3
4
6
7
8
9
10
11
5
1
2
3
4
6
7
8
9
5
1. Drain Cap
2. Silicon Gasket
3. Silicon Gasket
4. Drain Body
5. Overow
6. Silicon Gasket
7. Plastic Washer
8. Brass Locking Nut
9. Rubber Gasket
10. Chrome Locking Nut
11. Tail Pipe
1. Drain Cap
2. Silicon Gasket
3. Rubber Gasket
4. Drain Body
5. Overow
6. Rubber Gasket
7. Plastic Washer
8. Brass Locking Nut
9. Tail Pipe
vessel sink
vessel sink
counter top
supporting plywood
tail pipe
drain body
brass locking nut
tail pipe
drain body
overow
overow
channel
brass locking nut
3 1/2” 3 1/2”
1 5/8” Pop up Drain
Overall Drain Height: 8 1/2” (with drain open) / 8“ (with drain closed)
1 1/2” Pop up Drain
Overall Drain Height: 8 ” (with drain open) / 7 1/2“ (with drain closed)
Without Overow
Vessel Sink / Drain Installation (non-overow) Vessel Sink / Drain Installation (overow)
With Overow Without Overow With Overow
*measurements approximate *measurements approximate
Important Information
- This is a general installation guideline, actual
installation may vary. Consult a professional if
necessary.
- This installation guide is subject to change
without notice, please contact seller to request the
most updated version of this installation guide.
- Product drawings in this installation guide is for
illustration purpose only. Actual product may vary
depends on model.
- Read and understand this installation guide
completely.
- Observe all local plumbing and building codes.
- It is recommended that the installation of this
product be performed by trained and experienced
installers.
2015 Rev. 1A