Specification

4
RTF17 Rev.1 08/2021
Luxier
Installation
IMPORTANT:
• This product should be installed by professional installers.
• It is strongly recommended to dry t all parts before nal installation.
• Install shut o valves for the water supply to roman tub faucet at an easily accessible location.
• Provide adequate clearance around the roman tub faucet for easy installation and maintenance.
Mounting Hardware
Diverter Rod
(DO NOT damage the
gasket and the spring.)
Diverter Tee Connector
Flat side
Coupling
1
4
Hand Shower Base
Rubber Washer
and Locking Nut
5 6
2
1. The Diverter Tee Connector
and Mounting Hardware must
be removed from the Tub Spout
before installation. (CAUTION:
DO NOT damage the rubber
gasket and the spring on the
Diverter Rod)
5. Remove the Rubber Washer
and Locking Nut from the Hand
Shower Base. Insert the base
through the deck hole and secure
it with the washer and the locking
nut.
4. Insert the Control Handle
through the deck and secure
the unit with C Shape Rubber
Washer, C Shape Metal Washer
and Locking Nut. Attach the other
end of the Connecting Hose to
this Control Handle.
6. Attache Hand Shower Hose
to the Hand Shower as shown.
Insert the other end of the hose
into the Hand Shower Base.
2. Place tub spout through the
mounting hole and thread on
the mounting kit. Tighten the
2 screws with a screwdriver to
secure the tub spout in place.
3. Install the Diverter T
Connector and the Coupling back
onto the tub spout and attach the
Connecting Hose as shown.
Diverter T Connector
Connecting
Hose
To Control Handle
Coupling
3