Specification

ManualsBrandsLUXIER ManualsBathSingle Hole Single-Handle Bathroom Faucet with drain in Matte Black

BSH03S Rev. SG2 04/2021Luxier

Model Number:

BSH03-SB (Brushed Nickel)

BSH03-SC (Chrome)

BSH03-SM (Matte Black)

BSH03-SO (Oil Rubbed Bronze)

Features:

- Brass and Zinc Alloy Construction

- Single Hole Installation

- Drip Free Ceramic Cartridge

- Maximum Flow Rate 1.2 gpm at 60 psi

- Complies with:

NSF 61-9

ASME A112.18.1 / CSA B125.1

IAPMO / UPC / cUPC

CA AB-1953

ADA

Max. Deck Thickness 3.25”

*Drawings Not To Scale. All Measurements are Approximate*

1.8”

2.2”

6.5”

3.8”

4.9”

3.35”

7.4”

3.5”

3/8” Compression Fittings

1 3/8” Hole Size

Single Handle Lavatory Faucet

Summary of content (4 pages)

PAGE 1
Single Handle Lavatory Faucet Model Number: BSH03-SB (Brushed Nickel) BSH03-SC (Chrome) BSH03-SM (Matte Black) BSH03-SO (Oil Rubbed Bronze) Features: - Brass and Zinc Alloy Construction Single Hole Installation Drip Free Ceramic Cartridge Maximum Flow Rate 1.2 gpm at 60 psi Complies with: NSF 61-9 ASME A112.18.1 / CSA B125.1 IAPMO / UPC / cUPC CA AB-1953 ADA 6.5” 1.8” 3.8” 7.4” 4.9” 3.35” 2.2” Max. Deck Thickness 3.25” 3.5” 1 3/8” Hole Size 3/8” Compression Fittings *Drawings Not To Scale.
PAGE 2
Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9AM - 5PM Pacific Time or by email at support@luxierusa.com. Limited Lifetime Warranty (For USA Only) The manufacturer warrants this product to be leak and drip free during daily normal household use for as long as it is owned by the original purchaser of this product.
PAGE 3
Important Points • This installation guide is subject to change without notice, please contact us to request the most updated version of this installation guide. • This is a general installation guideline, actual installation may vary. Consult a professional if necessary. • Read and understand this instructions completely before installation. • Please follow all local building and plumbing codes. • Product drawings in this installation guide is for illustration purpose only.
PAGE 4
Installation B A A. Shut off water supply at the valves. Remove old faucet and clean the mounting surface for installation of new faucet. C B. First place the new faucet through flange on the mounting surface. The faucet hole should be 1 3/8” in diameter on the mounting surface. D C. From under the sink, install the rubber washer, steel washer and locking nut onto the shank. Tighten the locking nut and install the 2 screws to secure the faucet in place.