Installation Guide

4
BSH03S Rev. B 03/2018Luxier USA
Installation
B
A. Shut o water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D1. Apply Teon (TPFE) tape on the
shut o valves. Thread the tape in
counter-clockwise direction.
F. Remove aerator from the spout and
let the water run for about 1 minute to
clear any debris in the plumbing system.
Attach the aerator.
D2. Use a wrench to tighten the
hoses, please do not overtighten the
connections.
E. Turn on the water supply to check for
leaks at all connections.
B. First place the new faucet through
ange on the mounting surface. The
faucet hole should be 1 3/8” in diameter
on the mounting surface.
D1
Flexible water supply line
D2
E
F
A
15
14
12
13
C
C. Remove the 2 screws (15) from
locking nut (14). From under the sink,
install the rubber washer (12), steel
washer (13) and locking nut (14) onto
the shank (11) Tighten the locking nut
with a basin wrench or the socket tool
and install the 2 screws (15) to secure
the faucet in place.
02
03
01
04
05
06
07
09
10
11
12
13
14
15
16
08
01. Handle
02. Setscrew
03. Handle Cap
04. Cap
05. Bonnet
06. Cartridge
07. Faucet Body
08. Aerator
09. Flange
10. EVA Washer
11. Shank
12. Rubber Washer
13. Steel Washer
14. Locking Nut
15. Screws (x2)
16. Water Supply Hoses