Installation Guide

BPT01 Rev. 1A 102022
Bottle Trap
Available Finishes:
- Brushed Gold
- Brushed Nickel
- Chrome
- Matte Black
- Oil Rubbed Bronze
Important Information
Maintenance Guide
Tools you may need
• This installation guide is subject to change without notice.
• Read and understand this installation guide completely.
• Observe all local plumbing and building codes.
• This is only a general installation guideline, actual installation steps may vary.
Consult a professional if necessary.
• Product drawings in this installation guide is for illustration purpose only. Actual
product may vary by models.
• It is recommended that the installation of this product be performed by trained
and experienced installers.
Screwdriver, tape measure, masking tape, hacksaw, soft cloth, plumber’s putty, eye
protection, gloves.
Please follow the cleaning material manufacturer’s instructions. Damage caused by
improper treatment will not be covered by product warranty. In addition, pay attention
to the following points:
• Regular cleaning can prevent mineral build up on surface.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on
the material.
• Test the cleaner on a small area before using on the entire surface.
• Use a mild detergent such as liquid dishwashing soap and warm water for
cleaning.
• Do not use abrasive / harsh chemical when cleaning the xture as they will
damage and dull the nish.
• When using spray cleaners, spray rst onto a soft cloth or sponge. Never spray
directly onto the faucet as droplets can enter openings and gaps and cause
damage.
• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
14
Installation (cont.)
Cleaning
Warranty
8
9
10
11
7
E
6. Slide the outlet locking nut (8) and rubber
seal (7) onto one end of the outlet pipe (9).
(NOTE: rubber seal (7) must be installed with
tapered end pointing to the bottle drain body
as shown in Fig. E). Install the ange (10) onto
the other end of the outlet pipe (9)
7. Insert the outlet pipe assembly to the bottle
drain body and the waste drain pipe. Tighten
the outlet locking nut (8) to secure the bottle
drain. Use plumber’s putty and the
stub-out (11) can help prevent water leak. Slide
the ange (10) against the nished wall to
complete the installation.
8. Make sure all connections are tightened and
run the faucet for about a minute while check
for leak. Make adjustment as needed.
1. Place a spill tray under the drain. Use a large athead screwdriver or a coin and turn the
drain cover (13) counterclockwise.
2. Remove any debris that has collected in the bottle drain body (6).
3. Reinstall the drain cover with the o-ring to the bottle drain body
Limited Two (2) Year Warranty (For USA Only)
The manufacturer warrants this product to be leak and drip free during daily normal
household use for as long as it is owned by the original purchaser of this product. Please
keep a copy of the original invoice as proof of purchase.
Should a malfunction occur within the warranty period, Luxier USA will, as its option, (1)
repair or replace the defective part(s) or product at no charge; (2) issue a refund of the
purchase price paid for the product (Valid within 30 days from the date of purchase); or
(3) issue a credit to be applied against the purchase of a new Luxier product. Shipping/
delivery charges may apply and are in Luxier USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident,
negligence, improper installation, product abuse, product misuse, or use of cleaners
containing abrasives, alcohol or other organic solvents, whether performed by a contractor,
service company, or yourself, are excluded from this warranty.
Our responsibility under this warranty is limited to only to replacement parts and no
other costs. Luxier USA will not be responsible for labor charges and/or damage incurred
by installation, repair or replacement, nor for any indirect incidental or consequential
damages, losses, injury or costs of any nature relating to this faucet. Except as provided
by law, this warranty is in lieu of and excludes all other warranties, conditions, and
guarantees, whether expressed or implied, statutory or otherwise, including without
restriction those merchantability of tness for use.
This limited warranty is non-transferable. This limited warranty only applies to products
purchased and installed in the United States. This limited warranty covers the original
consumer purchase only and does not include business, commercial or industrial use of
this product. To obtain service under the Limited Warranty, please contact Luxier USA
at [e-mail]. The Luxier USA Customer Care Department will determine
whether to repair or replace your product, issue a refund, or issue a credit.