Use and Care Manual

1.Use a tape measure to measure the distance between the two hooks on
the back of the mirror and mark the same horizontal distance on the wall
with a pencil
2.Use an power drill to drill holes in the marked spots on the wall, and then
insert the expansion anchors into the wall.
3.Use a power drill or screwdriver to rotate the expansion screws into the
expansion anchors.
4.Hang the mirror on the drilled expansion screws. Note: You do NOT need
to remove the U-shape stand on the back of the mirror before hanging.
Below is a table of the weight of the mirror

MIRROR SIZE /inch WEIGHT / lbs
65*22 29.54
35.49
40.12
44.75
71*24
71*28
71*32