Please read the instructions carefully before use.
Tools needed Power Drill x 1 Screwdriver x 1 Tape Measure x 1 Pencil x 1 expansion anchor x 2 expansion screw x 2 Make sure the wall can support the weight of the mirror. Because the product is heavy, it is NOT recommended to hang it on the door.
Below is a table of the weight of the mirror MIRROR SIZE /inch WEIGHT / lbs 65*22 29.54 71*24 35.49 71*28 40.12 71*32 44.75 1.Use a tape measure to measure the distance between the two hooks on the back of the mirror and mark the same horizontal distance on the wall with a pencil 2.Use an power drill to drill holes in the marked spots on the wall, and then insert the expansion anchors into the wall. 3.
1.Spray some water containing detergent on the surface of the mirror, we recommend vinegar-water solution or conventional glass cleaner. 2.Wait a few seconds for the water to soften the stain, then wipe the stain with a clean cloth. For better cleaning results, we recommend microfiber cleaning cloths or newspaper. If you have any questions please contact: emma@glamorousgiftsinc.