Datasheet

LUXEON Rebel Color Datasheet DS65 (09/07/20) 6
Lambertian LUXEON Rebel at Test Current
[1]
Thermal Pad Temperature = 25°C
Table 2.
Typical
Temperature Typical
Dominant Wavelength
[2]
l
D
, Typical Coefficient of Total Typical
Peak Wavelength
[3]
l
P
, Spectral Dominant Included Viewing
or Color Temperature
[4]
Half-width
[5]
Wavelength Angle
[6]
Angle
[7]
CCT (nm) (nm/°C) (degrees) (degrees)
Color Min. Typ. Max. Dl
1/2
Dl
D
/ DT
J
u
0.90V
2u 1/2
Green 520 nm 530 nm 550 nm 30 0.05 160 140
Cyan 490 nm 505 nm 520 nm 30 0.04 160 140
Blue 460 nm 470 nm 490 nm 33 0.05 160 140
Royal-Blue
[3]
440 nm 447.5 nm 460 nm 24 0.04 160 140
Red 620.5 nm 627 nm 645 nm 20 0.05 160 140
Red-Orange 613.5 nm 617 nm 620.5 nm 20 0.08 160 140
Amber 584.5 nm 590 nm 597 nm 20 0.10 160 140
Notes for Table 2:
1. Test current is 350 mA for all LXML-Pxx1-0xxx products.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements.
3. Royal-Blue product is binned by radiometric power and peak wavelength rather than photometric lumens.
Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements.
4. CCT ±5% tester tolerance.
5. Spectral width at ½ of the peak intensity.
6. Total angle at which 90% of total luminous flux is captured.
7. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
8. All green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN).
9. All red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
10. Blue and royal-blue power light sources represented here are IEC825 class 2 for eye safety.
Optical Characteristics