Datasheet

LUXEON Rebel Color Porfolio Datasheet DS68 20121219 7
LUXEON Rebel Color Portfolio at Test Current
[1]
Thermal Pad Temperature = 25°C
Table 2.
Typical
Temperature Typical
Typical Coefficient of Total Typical
Dominant Wavelength
[2]
l
D
, Spectral Dominant or Peak Included Viewing
or Peak Wavelength
[3]
l
P
Half-width
[4]
Wavelength Angle
[5]
Angle
[6]
(nm) (nm/°C) (degrees) (degrees)
Color Min. Typ. Max. Dl
1/2
Dl
D
/ DT
J
u
0.90V
2u 1/2
Green
[7]
520.0 nm 530.0 nm 540.0 nm 30 0.05 160 125
Cyan
[7]
490.0 nm 505.0 nm 510.0 nm 30 0.04 160 125
Blue
[7]
460.0 nm 470.0 nm 480.0 nm 20 0.05 160 125
Royal-Blue
[3] [7]
440.0 nm 447.5 nm 460.0 nm 20 0.04 160 125
Red
[8]
620.0 nm 627.0 nm 645.0 nm 20 0.05 160 125
Deep Red
[3, 8]
650.0 nm 655.0 nm 670.0 nm 20 0.05 160 125
Red-Orange
[8]
610.0 nm 617.0 nm 620.0 nm 20 0.08 160 125
Amber
[8]
584.5 nm 590.0 nm 594.5 nm 20 0.10 160 125
PC Amber
[7]
588.0 nm 591.0 nm 592.0 nm 80 0.10 160 120
Notes for Table 2:
1. LXML-PR01-XXXX, LXM2-PL01-XXXX and LXM3-PD01-XXXX emitters are tested at 350 mA, LXML-PR02-XXXX emitters are tested
at 700 mA.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements.
3. Royal-blue and Deep Red LEDs are binned by radiometric power and peak wavelength rather than photometric lumens.
Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements.
4. Spectral width at ½ of the peak intensity.
5. Total angle at which 90% of total luminous flux is captured.
6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
7. PC amber, green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN).
8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
Optical Characteristics